Welcome to our websites!

Graphite rod

  • Graphite heating rod

    Graphite heating rod

    There are more than 20 kinds of graphite parts in CZ thermal field, whose material properties and processing technology have great influence on the quality of single crystal. We use high-quality graphite materials with high strength, bottom consumption, fine structure, uniform physical and chemical properties to produce various types of heat field and parts, so the products have high quality.
  • Graphite lubricating column/Rod/Graphite Lubricant Bar

    Graphite lubricating column/Rod/Graphite Lubricant Bar

    Because of its structural characteristics, it is a solid lubricant. The self-lubricating small rod made of high-strength and high-purity graphite is suitable for oil-free self-lubricating bearings, self-lubricating plates, self-lubricating bearings, etc. With the property of wear resistance and high temperature resistance, saving fueling equipment, they have always been indispensable for the development of military and modern industries and high, new and cutting-edge technologies. Graphite small rod is one of the graphite products for industrial applications, greatly reduces the mechanical maintenance, fuel costs, achieved the purpose of both lubrication and non-oil processing workpieces.
  • Graphite rod with copper rod

    Graphite rod with copper rod

    This product can be used as carbon arc electrode in metal welding technology. The carbon arc air gouging rod has the advantages of high efficiency, low noise and wide applicability. It is widely used in casting, boiler, shipbuilding, chemical industry and other industries to gouge low carbon, cast steel, stainless steel, copper and other metals.
  • High Purity Isostatic Pressing Graphite Rod

    High Purity Isostatic Pressing Graphite Rod

    Isostatic Pressing Graphite is a new type of graphite material developed in the 1940s with a series of excellent properties. Isostatic Pressing Graphite has good heat resistance. In inert gas, its mechanical strength increases with the increase of temperature, reaching the peak value at about 2500℃.Compared with ordinary graphite, the structure of isostatic graphite is more compact, delicate, and symmetrical. Its thermal expansion coefficient is very low, its thermal shock resistance is excellent, and its isotropic, chemical corrosion resistance is strong, meanwhile, it has good thermal and electrical conductivity and excellent machining performance.
  • Spectrum Pure Graphite Rod

    Spectrum Pure Graphite Rod

    Spectral pure graphite rod must be of high purity, especially in the qualitative analysis of trace elements, extremely trace impurities are not allowed to exist. Generally speaking, impurities in graphite materials used for inspection in spectral analysis mainly include Al, B, Ca, Cu, Fe, Mg, Si, Ti, V etc. in addition, K, Mn, Cr, Ni, etc. may also exist. Due to the improvement and application of high purification research and purification technology in related industries, almost no impurities can be detected now, and the industrial manufacture of high purity graphite rod for spectral analysis has been realized.
  • Upper and lower electrode rods for spectral analysis

    Upper and lower electrode rods for spectral analysis

    Emission spectrum analysis is based on the principle that the excitation of elements or compounds is the specific wavelength of the spectrum. The sample is heated or electrified to make it emit light, the position and intensity of spectral lines are measured, and the elements or compounds are quantitatively analyzed, which are widely used in various analytical researches.
  • Graphite stirrer for Precious Metal Forming

    Graphite stirrer for Precious Metal Forming

    Graphite stirring rod is used in the refining process of precious metal, which can homogenize, equalize heat and remove gas. This mixing rod is made of high-density, high-purity and high-strength isostatic pressure graphite or molded graphite. Its surface is smooth and its size is accurate, which is completely consistent with the design drawing.
  • Oxidation resistant graphite

    Oxidation resistant graphite

    Description In order to improve the service life of graphite products in oxygenated high temperature environment and reduce the oxidation loss of graphite products, anti-oxidation treatment on graphite will be needed. According to the weight loss mechanism of graphite materials, there are two ways to improve the oxidation resistance of graphite materials: 1. Adding antioxidants into the graphite matrix to reduce the oxidation rate of materials; 2. Coating an anti-oxidation coating on the...
  • Graphite round plate

    Graphite round plate

    Graphite wafer is made of high purity graphite. We can customize the size according to the customer's demand. Graphite is widely used in industry, such as high temperature Products for smelting, lubricant for mechanical industry, electrode and pencil lead; high grade refractory and coating for metallurgical industry, pyrotechnic material stabilizer for military industry, pencil lead for light industry, carbon brush for electrical industry, electrode for battery industry, catalyst for chemical fertilizer industry, etc. After deep processing, flake graphite can produce graphite emulsion, graphite sealing materials and composites, graphite products, graphite anti-wear additives and other high-tech products, becoming an important non-metallic mineral raw materials in various industrial sectors.